Mitsubishi Evo VIII to
IX Bumper Conversion

So you’ve got a Mitsubishi Evolution VIII (8) and you’re contemplating swapping the bumper out for the IX (9) version. Well you’ve come to the right place. This story breaks down everything that’s needed and the steps involved. It’s actually a bolt-on affair and if you’re lucky you’ll find a used one that has all the brackets and grilles already installed.

Mitsubishi-Evo-VIII-IX-bumper-conversion-001

If you don’t though, the easiest route is to buy a new one from Mitsubishi. Unfortunately, the cost of all the grilles and supporting parts can add up quickly. Like over $1300.oo, so be prepared to shell out some big bucks for this conversion. I personally think it’s worth it because I love the updated and more aggressive look of the IX bumper and it adds value to the car.

Mitsubishi-Evo-VIII-IX-bumper-conversion-035

Don’t forget the cost of paint because Mitsubishi sells the bumpers in only one color; white.

Mitsubishi-Evo-VIII-IX-bumper-conversion-038

Here’s a list of the bare essential parts you’ll need:

6400B002WA- Front Bumper Cover
6512A149WA- SE Lip Spoiler
6400B288- SE Lip Spoiler insert
6512A152- SE Lip Side Bracket L
6512A151- SE Lip Side Bracket R
6402A033- Upper Center Mesh (where badge goes)
6400A384- Lower Center Mesh (covers intercooler)
6402A032 2- Side Grille Mesh
6400A390- Duct for Oil Cooler
6400A391BA- Cover for bolt on left side of intercooler
6400A392BA- Cover for bolt on right side of intercooler
6402A023- Lower Left Mesh
6402A024- Lower Right Mesh
7415A050 1- Mitsubishi Diamond Emblem

If you’re not looking to re-use any of the Evo VIII parts then you’ll also need the following:

6400A387 1- Center Grille (thin grille in center)
6402A032 2- Side Grilles (in front intercooler pipes)
6402A030- Lower Mounting Plate
6400A371 1- Side Absorber – LEFT
6400A372 1- Side Absorber – RIGHT
6400A370 1- Center Absorber

You can pick up everything you need from Mitsubishiparts.net They’ve got a great group of guys working there that know Evos and can help you source all these parts quickly and for a great price.

Mitsubishi-Evo-VIII-IX-bumper-conversion-002

Mitsubishi-Evo-VIII-IX-bumper-conversion-003

To remove your Evo VIII bumper start with the plastic retainer clips and bolts under the hood area.

Mitsubishi-Evo-VIII-IX-bumper-conversion-010

There are two bolts on either sides of the intercooler that also need to be removed.

Mitsubishi-Evo-VIII-IX-bumper-conversion-006

Mitsubishi-Evo-VIII-IX-bumper-conversion-007

Mitsubishi-Evo-VIII-IX-bumper-conversion-008

But you’ll need to take the license plate cover off as well because the right side bolt is hidden behind the plate.

Mitsubishi-Evo-VIII-IX-bumper-conversion-043

On the sides of the bumper there are more plastic screw-on clips and bolts holding it in place. Remove anything that attaches the bumper to the body or wheel well liner.

Mitsubishi-Evo-VIII-IX-bumper-conversion-013

Underneath the car, there’s a large plastic tray that will have to come off as it ties the bumper to the chassis.

Mitsubishi-Evo-VIII-IX-bumper-conversion-011

You can now start pulling the bumper off from the sides. Pop it out from the fender, repeat the same for the other side but don’t go pulling it too far from its original location.

Mitsubishi-Evo-VIII-IX-bumper-conversion-012

That’s because, if you’re working solo you can grab it from the center and remove it in one swift attempt.

Mitsubishi-Evo-VIII-IX-bumper-conversion-014

And that wraps up the bumper removal process.

newest oldest most voted
Notify of
Mark
Guest
Mark

How the fuck are you going to put the Evo 9 bumper on the Evo 8 when the bumper upper reinforcement bar is discontinued part number 6400A370. Don’t make how unless it’s 100% legit.